Commercial Spray Painting: Refreshing Your Building Without Replacement

A Cheaper Way to Refresh Commercial Property

Whether it is faded cladding, a tired storefront, or weathered exterior metalwork, commercial spray painting restores the look of a building in place. There is no need to replace panels, frames, or signage surrounds, and the work can be planned so the premises keep trading.

What We Cover

Our commercial work spans cladding spraying for warehouses and retail units, and shop front spraying for storefronts and aluminium frames. The same on-site approach also covers fascias, signage surrounds, doors, shutters, and exterior metalwork.

Why On-Site Spraying Wins

• A fraction of the cost of replacement
• Work phased around trading and operations
• Accurate colour matching to brand specifications
• Out-of-hours scheduling available

The Process

Every commercial job runs in the same controlled order, whatever the surface:

• Survey the surfaces and confirm the right coating system
• Clean and decontaminate to remove dirt, chalking, and contamination
• Repair and treat any corrosion or surface damage
• Mask adjacent glazing, signage, and surfaces
• Apply primer and topcoat systems suited to the substrate
• Allow the finish to cure, then check coverage and colour consistency

How Long It Lasts and Colour Matching

A professionally applied coating is UV-stable and built to last 10 years or more, backed by a written guarantee on qualifying projects. We match to any RAL or BS reference or a brand specification, so a refresh can also serve as a rebrand across a site or a portfolio of units.

Why Hampshire Businesses Choose Newlook

We are ISO accredited, plan the work around your trading and operations, and keep the team reachable on site. Because we are local, lead times are short and we can phase a job across several elevations or units without closing the premises.

Which Surfaces Benefit Most

On-site spraying earns its keep on large or awkward surfaces where replacement is disproportionately expensive: long cladding elevations, full storefronts, run of fascias, and exterior metalwork that is sound but tired. In each case the substrate is fine and only the finish has aged, so recoating delivers the visual lift of a refurbishment without the cost, waste, or downtime of replacing the material.

It is equally useful for standardising appearance across several buildings or units. Where an operator wants a consistent colour and finish over a portfolio, spraying lets each property be brought into line on a rolling programme rather than all at once.

Timing and Disruption

Most commercial premises cannot afford to close, so the work is built around that. Elevations and units are phased, noisy or disruptive stages are timed sensitively, and out-of-hours or overnight working is available where daytime work would interfere with trading. The aim is a finished, refreshed property with as little interruption to your operations as the job allows.

Frequently Asked Questions

What surfaces can be sprayed on site?

Sound cladding, aluminium and metal shop fronts, fascias, signage surrounds, doors, shutters, and most exterior metalwork. If a surface is past saving we will say so at the survey rather than coat over a failing substrate.

Can the work be done without closing?

Usually, yes. The job is phased around your operations and can be scheduled out of hours where trading hours make daytime work impractical.

Can you match our brand colours?

Yes. We match to any RAL or BS reference or a supplied brand specification, so the finished property ties in with your signage and identity.

How is a commercial job priced?

On what the work actually involves: the surfaces and area covered, their condition, the access required, and whether the job runs out of hours. We confirm the figure in a written quote after a free survey, so there are no surprises.

Discuss Your Project

We cover commercial premises across Hampshire. Contact Newlook Protective Coatings to arrange a survey and written quote.